Laminate flooring is one of the easiest and most beautiful additions to any home. It has been gaining so much popularity in the past few years. So many homeowners are now curious and looking forward to installing laminate flooring to give their house a fresh new look.

Laminate Flooring Water Damage

There are so many positives about laminate flooring like it’s very durable and resilient to daily wear, it has a unique style, but unfortunately, there’s one drawback. Laminate flooring and water are not very good friends.  

That means water cannot mix or pass through the laminate flooring. That’s why water under laminate flooring is among the most common issues that homeowners face. So, if the laminate flooring is not installed properly, it can cause disaster in high-moisture or water situations. So, keeping that in mind, we’ve prepared a guide on how to protect your laminate flooring from water damage and fix the laminate floor that has got wet. 

How does water damage the laminate flooring?

There are different types of water damage to the laminate flooring. First, you need to understand how the water enters under laminate flooring. When the laminate flooring gets in contact with water, it starts to soak into the layers. It damages the glue that holds the flooring together, and eventually, the whole laminate flooring starts to fall apart. Generally, there are four different layers in laminate flooring.

  • Backing Layer

It is the bottom of the laminate flooring that touches the floor. The layer works as a moisture barrier between the base and the laminate boards. 

  • Base or Core Layer

This is the top layer that forms the basic structure of the laminate flooring boards. It is made up of high-density fiberwood material. 

  • Design Layer

You can find laminate flooring in a wide range of designs, and design layers are what provide patterns or designs to laminate floorboards. Also, some laminate floors are painted, or some boards have images printed on thin paper and glued to the core layer. 

  • Wear Layer

The last and most important layer is the wear layer. The wear layer is created by covering the laminate floorboard with several layers of resin. This provides great durability to the floorboards and protects them against regular wear and scratches. Also, it plays a vital role in keeping the moisture out.

Out of all four layers, the core or base layer is vulnerable to water damage, and once the base layer is damaged, you can’t fix it. So the only option is to replace the laminate board. 

Six Easy Steps To Clean Water Under Laminate Flooring

The following steps completely explain how you can dry water underwood laminate flooring. 

#1. Stop the source of water 

Once you’ve detected the water under the laminate flooring, the first thing is to spot the source of that water. Because without finding and stopping the source of water, you cannot resolve the issue. One of the common places for leaks is a sink, dishwasher, or any water line. Once found the source, stop the flow of water.

#2. Remove Standing Water

Laminate floors are very good at handling water; however, the water should not be left there for a long time. Instead, take a dry piece of cloth or towel and start cleaning the standing water on the surface of the laminate flooring before proceeding to the next step.

While cleaning the water, try to find if there’s any space between the floorboards where water can travel under the flooring. 

#3. Examine the Affected Area 

After removing the water from the surface, now you need the affected area of the laminate floorings. Make sure to pay extra attention while finding the affected spots. If any spots get unnoticed, all your efforts would go down the drain. Any trick to examine the affected area is to step on the affected board, push it, and observe if there’s water under the floor.

Moreover, the damaged board can also be spotted by the discoloration. Therefore, make sure to mark all the affected areas individually.

#4. Remove the Affected Boards 

In order to remove the flooring, you need a tool or a knife, thin enough to get under the board so you can lift it up and remove it. Carefully remove all the affected floorboards and stay patient. The laminate flooring is not difficult to remove. However, you can damage the flooring in a hurry.

#5. Dry The Floorboards

Once you’ve removed all the floorboards, you should start drying the water underwood laminate flooring and also dry the removed boards. You can use fans or dehumidifiers for that. Make sure to keep the floorboards flat while drying them; otherwise, the heat can cause them bents that make the reinstallation process difficult. 

TIP: It’s essential to disinfect the floorboard after cleaning them and dry them later. Disinfecting will not only kill the molds but also prevent the water damage odor. 

#6. Reinstall The Flooring 

After cleaning the water under the laminate flooring and drying the floorboards, it’s time to bring your floor back to its original shape. Also, if any floorboard is damaged, you should discard it and place a new floorboard for better reliability. Reinstallation is a very straightforward process. All you need is to put glue and place the laminate floorboards in order. 

LEAVE A REPLY

Please enter your comment!
Please enter your name here