Complete Guide to sump pump repair

A sump pump plays a crucial role in the water management system of every house. Its functionality is fantastic when it’s working fine. However, when it stops working, it creates a huge mess which is the last thing any homeowner would want. Fortunately, there are many warning signs that indicate the sump pump failure. You can easily do that by observing your sump pump’s performance and repair it at the right time before walking into a flooded basement or crawl space of your home. 

So, here’s what you need to do after detecting a sump pump problem. First, analyze the complexity of the problem. Some sump pump repairs are not complex, and you can easily do that by yourself. On the other side, you can contact sump pump repair technician or waterproofing companies near you as well.  That said, let’s talk about the steps you can do to perform the sump pump repair yourself. 

Step #01 Check the Float

The most important part of a sump pump is float. When the water quantity rises in the sump pit, it results in the float rising, and as a result, the water begins to come out of the pit. To check the float, you need to pour some water into the pit and see if the float is rising or not. If the float rises and the pump gets activated and starts removing the water, then shut off, that means the float is working just fine. You must do this test once or twice every month. 

Step #02 Clean the Sump Pit

Another important way to maintain the sump pump is pit cleaning. If there is any debris or sand stuck in the sump pit, it should never be ignored. Otherwise, it can float problem. Remember, even if your sump pump is working completely fine, cleaning the pit is a crucial part of the repair and maintenance of the sump pump. So, would you clean the sump pit in routine or rather invest money in installing a new sump pump? I guess cleaning would be a better option. 

Step #03 Check Valve Testing 

Testing the check valve is important to see if you’re sump pump is working fine or not. The test is super easy. Simply pour some water into the sump pit and see if the pump is doing its job or not. Water flowing in the sump pit should immediately cause the pump to start and remove the water. However, if the water is returning to the pit, there is an issue with the check valve. Once identified, you can simply order a new check valve and replace it. 

Step #04 Clean the Impeller

Cleaning the debris from the sump pit in a routine is an essential part of sump pump maintenance. But sometimes, debris reaches the impeller and starts jamming it. However, to identify this problem, you need to follow some steps. 

First, turn off the sump pump and unplug it. After that, start disconnecting all the pipes from the pump. Lastly, you need to disassemble the complete pump to access the impeller. Once done, now you can see if there is debris jamming it. If you identify the debris, clean and similarly reassemble everything. 

Step #05 Check the Power Supply

Sometimes there is no problem inside the sump but from the external source. For example, if your sump pump is not working properly, there might be an electric issue. For that, you should check all the wires and ensure there are all plugged in properly.

Secondly, the circuit breaker should be checked. Sometimes there real problem is in the ground fault circuit interrupter. Make sure to check that out. Once everything is checked, reset the pump by pressing the button situated on GFCI. However, if there is no problem with the power supply, you probably need to replace the sump pump. 

Signs that you need to replace your sump pump

Not all sump pump problems can be rectified with sump pump repair. Some issues are more severe and require replacement. But how can you identify that your sump pump needs to be replaced or repaired? Here are some signs that can help you.

1. The sump pump is constantly running

If your sump pump is continuously running regardless of the water levels or weather conditions, that also means something is not right. The continuous running pump can overheat and premature failure. The sump pump should only work when there’s water in the sump pit. 

2. The sump pump is clogging

If you’re facing clogging issues repeatedly, that is a serious indicator that it needs to be replaced. 

3. The sump pump is making loud noises

If you hear loud noises like clanging, gurgling or rattling, that is a critical sign that there is a serious problem with your sump pump, and its needs to be replaced. Also, these noises indicate that the motor is ageing and reaching the end of its life. 

4. The sump pump is cycling erratically

If your sump pump takes a long time to clear the water from the spit, it means a failed check valve or some other serious problem. In this case, it’s better to replace it because the sump pump gets aged and loses its efficiency with time. 

Leave a Comment