If you are obsessed with rugs and carpets, you must already have a faux sheepskin rug, adding the right texture to your home. These rugs are plush and luxurious and provide a sense of elegance and grace to your home. They generally come in light shades like off-white, cream, etc., so it’s no wonder that they get dirty pretty easily. These rugs need regular cleaning and maintenance to maintain their texture and beauty. They are soft to walk on and can be perfect if you have a toddler crawling around your home.
Some of these rugs are washable by machine, so if you are here reading this article, we assume you are not one of the lucky ones. But fear not! Keeping your faux sheepskin rug good as new is no rocket science. These carpets accumulate dust easily and cling to it, but there are various methods to clean these rugs without breaking a sweat. You can check the rug’s tag to see if there are any special instructions on how to clean the rug. If yes, then keep them in mind, in addition to the tips we are about to provide!
Steps to Keeping Your Faux Sheepskin Rug Spotless
Did you know that rugs can hold up to four times their weight in dirt and bacteria? If not cleaned regularly, it can take a sharp turn from luxury items to a lair of harmful bacteria. Most rugs are not washable in the machine, so handwashing is the only other option left. Let us walk you through the four important steps of how to keep your faux sheepskin rug clean and brand new!
Step 1: Handwashing the Rug
First, you need to find a tub big enough to wash the rug in. The trick is to be gentle on the rug, don’t go all rough and aggressive on cleaning it as that can damage the fibers. The best way of handwashing the rug is to do it in a bathtub.
- A large tub, or preferably a bathtub
- Mild liquid detergent or castile soap
Steps to Follow:
Hand washing your faux sheepskin does not require a lot. Just follow the steps below diligently, and you’ll be done in the blink of an eye!
- Give your rug a proper shake outside your home to eliminate all the loose dust and debris.
- Put a good amount of soap on the bottom of your tub. Depending on the size of your rug, the amount of detergent required will vary.
- Fill the tub with cold water up to a level such that the rug can be submerged in it.
- Put your dirty rug into the tub and submerge it fully.
- Not vigorously but gently rub the rug together with your hands to properly work the soap into the fibers.
- If there is a particular spot you want to focus on, perhaps a stain, use your fingers to comb through the dirt at the spot underwater.
- You can also directly apply soap to the stain if you want it to be more effective.
- Once you are done with the thorough cleaning part, you can drain the tub and rinse out any leftover soap and dust with normal water.
- Squeeze out as much water as you can from the rug, so it is easier to dry it later on.
Step 2: Drying Your Rug
The next step is what brings you one step closer to turning your favorite faux sheepskin rug brand new. Drying is a very important part of the process. Be sure not to throw your rug in the dryer, no matter how tempting it sounds. The heat can really damage the fibers and, in some cases, even have the backings shrunk. There are better means of drying your rug; let’s check them out!
- A good number of dry towels to place your wet rug on, and an extra one to press the water out of it
- A good place to hang the wet rug, so it can freely drip the excess water
Steps to Follow:
- Arrange all the towels on the ground so that you can place the rug on it.
- Shake and squeeze out any extra water and spread out the rug on the towels.
- Press the excess water out with the extra towel, and if it gets wet, bring a new one.
- Absorb as much water as possible and then hang the rug outside to air dry.
Step 3: Combing the Rug
After washing and drying, if you notice that your rug is clean but not as fluffy as before, there’s absolutely no need to panic. It is normal; what your rug needs is proper combing. However, that can only be done when your rug is 100% dry, and being even a little wet can result in chunks of fiber coming off while combing.
- A wide-toothed metal comb
Steps to Follow:
Remember to double-check for wet patches on the rug before starting the combing unless you may end up damaging the rug.
- Spread out the rug on a surface where you have access to all of it.
- Start at a corner and forge ahead, gently removing the tangles.
- Comb in the direction that the strands of fiber are inclined towards.
Step 4: Spot-Cleaning Your Rug
Did you spill something on your faux sheepskin rug? Well, there is a way to get the stain off without washing the whole thing all over. However, it may not work if you have already let the stain stay on the rug for too long.
- Mild liquid detergent
- Spray bottle
- Dry rag
Steps to Follow:
If you just want to clean a particular spot on the rug, then the following are the steps you should go through:
- Pour some detergent soap into your spray bottle and mix it with warm water. Give the bottle a proper shake.
- Remove any extra liquid spill by pressing with a clean cloth.
- Spray the soap mix on a clean cloth and press it firmly on the stained spot.
- Repeat the above step until the stain is gone and then keep changing the dirty rags.
- Once you get rid of the stain, fill the spray bottle with clean water and spray on the rag to rinse off the soap.
- Press the area firmly with a dry cloth to absorb as much wetness as possible.
Want to explore more unique ideas then must visit on How to Clean Sheepskin Rug.
Say Goodbye to Dirty Rugs!
There is nothing worse than getting your favorite faux sheepskin rug dirty or stained. Follow the above steps and tricks to get your rug to look brand-new even after years of proper usage. Forget having to say goodbye to your rug because of one bad spill; now you know how to get rid of the worst of stains. Clean your faux sheepskin rug periodically to keep it just as soft, plush, and exotic as before!